SYD-261 Manual Pensky-Martens Closed-cup Flash Point Tester

Model Number: SYD-261 Brand Name: 1 Key Specifications/Special Features: Summary:This instrument is designed and manufactured as per standards GB/T 261-2008Determining flash point Pensky-Martens closed cup method and ASTM D93 standard test methods for flash pointUsed to determine the closed cup flash point of the petroleum products in the temperature range from 40℃ to 360℃

Main technical features:

• This instrument is designed as per GB/T261 and ASTM D93
• The heating power is continuously and stepless adjustable
• The power is shown visually by voltmeter
• The temperature control mode is advanced and reasonable
• The structure is designed small and exquisite
• Stainless-steel table board is beautiful and easy to clean
• Operation is easy
• Test results are precise
• It has been chosen as the instrument to test the closed cup flash point by many metering and detecting institutes

Main technical specification and parameters:

• Power supply: AC (220±10%)V, 50Hz
• Heating device: heating power is continuously adjustable from 0W to 600W
• Heating rate: (1-12)℃/min, controllable and adjustable
• Stirring rate:
  • Procedure A: (90-120)rpm
  • Procedure B: (250 ±10)rpm
• Standard oil cup:
  • Inner diameter: 50.7mm-50.8mm
  • Depth: 55.7mm-56.0mm
  • Scribed line depth of capacity of testing oil: 33.9mm-34.3mm
  • Capacity of testing oil: about 70mL
• Igniting device:
  • Igniting source: gas (or other civilian fuels, the same as below)
  • Electric ignition, gas flame diameter: 3.2mm-4.8mm
• Thermometers: mercury in glass thermometer, corresponds with GB/T261-2008 and ASTM E1
• Scale 5°C-110°C, division 0.5°C
• Scale 20°C-150°C, division 1°C
• Scale 90°C-370°C,division 2°C
• Ambient temperature: ≤35℃
• Relative humidity:≤ 85Ra